Turbine Digital Diesel Fuel Flow Meter

For different country use, the high accuracy meter comes with 4 unit options Liters (L) /Gallons (GAL)/ Pints (PT)/ Quarts (QT). The battery inside can supply 9000hours operation approximately. By fine adjusting, the accuracy of the meter can be as high as ±0.3%.

Parameters

Connector: BSPT1”
Voltage: DC 2.3V-3.3V
Max.Pressure: 0.25Mpa
Precision: ±0.5%
Flow: 20-120L/min
Usage: Diesel, Kerosene, Gasoline
Working Temp.-10~+60℃
Battery: AAAsize×2
Stand-by time: 2years
LCD Display: 5-digit
Single count: 0.00-9999.9
Accumulation: 0-99999


Fuctions
Reset to “0”
press “DISPLAY” for 1second reset to zero.

Cumulative Total
press “CALIBRATE” indicating the cumulative total fueling. When the cumulative total reaches a maximum reading 999,999, it will automatically reset to zero.

Calibrate adjusting
press“CALIBRATE” and hold for 5 seconds, press “DISPLAY” or “CALIBRATE” for adjusting. For example, when the meter shows 100L while the liquid comes 105L put the coefficient1.0000-0.05=0.9500 when the meter shows 100L while the liquid comes 95L put the coefficient1.0000+0.05=1.0500 .And the display is programmed to turn back to stand-by situation after 5 seconds. ( The initial coefficient is 1.0000)

Units Switch
press“CALIBRATE” and hold for 5 seconds, press “DISPLAY” for 5 times and then press“CALIBRATE” for units swith among Liters(L) / Gallons(GAL) / Pints(PT) / Quarts(QT). . And the computer display is programmed to turn back to stand-by situation after 5 seconds.


Maintenance
The meter is virtually maintenance-free. How-ever, it is important the rotor moves freely. Keep the meter clean and free of contaminants.If the rotor does not turn freely, apply a penetrating lubricant on the rotor, shaft, and bearings.Remove any debris or deposits from the rotor using a soft brush or small probe. Be careful not to damage the turbine rotor or supports.

Replace batteries when “L Bat” comes


PS: For the most accurate reason, before using, make sure there is no air in the system and meet the meter’s minimum flowrate requirements. Please keep the meter away from the magnetic objects or shock the meter.




Package and workshop


FOB prices


Note: Above price just for reference, actual price please refer to sales

To World, METERY is Just A Company, But to METERY, You Are The World...